Calwest Services offer calibrations for all brands of pressure gauges, vacuum gauges, and pressure transducers. All calibrations are in accordance with MSA Test Method 2, as the accepted national standard for calibrations of mechanical pressure gauges.
Pressure gauges -94kPa (vacuum) to 100MPa NATA endorsed
We can calibrate instruments from -94kPa (vacuum) up to 100MPa, and will provide a NATA endorsed report upon request. As a normal part of our service, we will clean your instrument and make minor repairs at no extra cost. We also offer a comprehensive maintenance service.
Backflow Test Kits
Backflow prevention devices play an important part in protecting drinking water supplies from the backflow of contaminated water. According to council and state regulations, these must be tested on a regular basis.
For plumbers, it is vital that your backflow test kits are regularly serviced and calibrated to ensure correct operation and reliability. This provides assurance to your clients and the relevant authorities about the accuracy of your test results.
It is required under AS 2845.3 that backflow test kits must be annually calibrated by a registered laboratory. Calwest Services, as a registered laboratory, offer NATA endorsed calibration reports to AS 2845.3 compliance. We also offer a comprehensive maintenance service for your testing instruments.
For more information about backflow test kit calibrations, call Calwest Services on (08) 94515070